Filter
Top Products
( 14 / 42 )
Chapter 2. Preparation
2.1 Terminology
Some specific words used in this user's manual are defined as follows:
Emulator system
This means an emulator system built around the M32100T-EZ-E emulator. The M32100T-EZ-E
emulator system is configured with an emulator, host machine, emulator debugger and target board.
Emulator (M32100T-EZ-E)
This means an emulator for the M32R Family MCUs on which the debug interface SDI (Scalable
Debug Interface) is mounted. This emulator is connected to the target board via the SDI interface
cable.
Host machine
This means a personal computer used to control the emulator.
Emulator debugger
This means the software tool PD32RM to control the emulator from the host machine through an
interface. The PD32RM is included with this product.
Firmware
Program that analyzes contents of communication with the emulator debugger and controls the
emulator hardware. This program is downloadable from the emulator debugger PD32RM when
occasion demands.
Target MCU
This means the microcomputer you are going to debug.
Target system
This means a user's application system using the microcomputer to be debugged.
Target board
This means a board using the microcomputer to be debugged.
Target program
This means a program using the microcomputer to be debugged.
JTAG connection
A connection of the emulator via the MCU installed in the target board and the SDI interface
connector. In this case, the MCU on the target board executes the target program.