Filter
Top Products
( 8 / 42 )
Caution for Abnormal Operation:
• If the emulator malfunctions because of interference like external noise, shut down the emulator
once and then reactivate it.
CAUTION
Cautions for Power Supply:
• Power is supplied from the host machine to this product via the USB interface cable.
• Switch on and off this product by the USB interface cable.
Cautions to Be Taken for Handling This Product:
• Use caution when handling the product. Be careful not to apply a mechanical shock.
• Do not touch the connector pins of the communications interface cable, emulator and target system.
Static electricity may damage the internal circuits.
• Do not pull this product by the cable connected to the emulator. The cable may cause a break.
•Do not use inch-size screws for this equipment. The screws used in this equipment are all ISO
(meter-size) type screws. When replacing screws, use same type screws as equipped before.
Cautions for Powering Up Sequence:
•When turning on power, activate the emulator first and then the target system.
•When turning off power, deactivate the target system first and then the emulator.
•Always wait for about 10 seconds after turning off the power before turning it on again.
Caution for Installation:
•This product is designed to be used being laid down. Do not use this product being set up.