Filter
Top Products
Routine maintenance
51
A
c Close the control panel cover.
Note
In addition to cleaning the glass strip with
a soft lint-free cloth moistened with water,
run your finger tip over the glass to see if
you can feel anything on it. If you feel dirt
or debris, clean the glass again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning.
d Plug the machine’s power cord back into
the electrical socket first, connect all
cables, and then plug in the telephone
line cord. Turn on the machine.
Cleaning the document feed A
a Turn off the machine’s power switch.
Unplug the telephone line cord first,
disconnect all cables, and then unplug
the power cord from the AC power
outlet.
b Lift the control panel cover (1).
Carefully remove dirt from the document
feed (2) with a soft lint-free cloth.
c Close the control panel cover.