Filter
Top Products
Telephone and external devices
33
6
Using Remote Codes 6
Remote Activation Code 6
If you answer a fax call on an extension
telephone, you can tell your machine to
receive it by pressing the Remote Activation
Code l51. Wait for the chirping sounds then
replace the handset. (See Fax Detect
uu page 25.)
If you answer a fax call on the external
telephone, you can make the machine
receive the fax by pressing .
Remote Deactivation Code 6
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T ring
(double-ring) after the initial ring delay. If you
pick up the call on an extension telephone
you can turn the F/T ring off by pressing #51
(make sure you press this between the rings).
If the machine answers a voice call and
fast/double-rings for you to take over;
you can take the call at the external telephone
by pressing .
Turning on the Remote Codes 6
You need to turn the Remote Codes setting to
on to use the Remote Activation Code and
Remote Deactivation Code.
a Make sure you are in FAX mode
.
b Press 2, 1, 4.
c Press a or b to choose On.
Press OK.
d If you do not want to change the Remote
Activation Code, press OK.
e If you do not want to change the Remote
Deactivation Code, press OK.
f Press .
Changing the Remote Codes 6
The preset Remote Activation Code is l51.
The preset Remote Deactivation Code is #51.
If you are always disconnected when
accessing your External TAD, try changing
the three-digit remote codes, for example ###
and 555.
a Make sure you are in FAX mode
.
b Press , 2, 1, 4.
c Press a or b to choose On or Off.
Press OK.
d If you chose On in step c, enter the new
Remote Activation Code.
Press OK.
e Enter the new Remote Deactivation
Code.
Press OK.
f Press .