Filter
Top Products
84
White lines, bands or ribbing
across the page
Check the machine’s environment. Conditions such as high
humidity and high temperatures may cause this print quality
problem. (See Product Safety Guide: Choose a safe location for
your product.)
Clean the drum surface. (See Cleaning the drum unit
uu page 53.)
If the problem is not solved after printing a few pages, put in a new
drum unit. (See Replacing the drum unit uu page 45.)
White Spots on black text and
graphics at 94 mm intervals
Black Spots at 94 mm intervals
Make ten copies of a blank, white sheet of paper. (See How to
copy uu page 38.) If the problem is not solved, the drum unit may
have glue from a label stuck on the surface of the drum roller.
Clean the drum unit. (See Cleaning the drum unit uu page 53.)
The drum unit may be damaged. Put in a new drum unit. (See
Replacing the drum unit uu page 45.)
Black toner marks across the
page
If you use label sheets for laser printers, the glue from the sheets
may sometimes stick to the surface of the drum roller. Clean the
drum unit. (See Cleaning the drum unit uu page 53.)
Make sure that you use paper that meets our specifications. (See
Acceptable paper and other print media uu page 13.)
Do not use paper that has clips or staples because they will
scratch the surface of the drum.
If the unpacked drum unit is in direct sunlight or room light, the unit
may be damaged.
The toner cartridge may be damaged. Put in a new toner
cartridge. (See Replacing the toner cartridge uu page 40.)
The drum unit may be damaged. Put in a new drum unit. (See
Replacing the drum unit uu page 45.)
Examples of poor print quality Recommendation
94 mm
94 mm
94 mm
94 mm
ABCDEFGH
abcdefghijk
ABCD
abcde
01234