Filter
Top Products
Printing with the Finisher
95
4
❒ Staple printing will be canceled under the following conditions:
• If the number of staple jobs exceeds maximum. For information about the
maximum number, see “Specifications”, General Settings Guide.
• If a paper size that cannot be stapled is selected. For information about pa-
per sizes that can be stapled, see “Specifications”, General Settings Guide.
• If positions other than those fixed for stapling are specified.
• If there are inconsistencies between the orientation in duplex mode and the
staple position.
• If paper sizes are mixed when a different paper size is specified during a
print job.
• When staples have run out.
• When feeding paper from the bypass tray.
• When staples have run out and Auto Continue is set, printing will continue
without stapling after the message has been displayed.
❒ When using the optional 2 tray finisher or optional booklet finisher to select
other than [2 at Center], the following paper sizes can be stapled using Mixed
Size mode:
• A3 L and A4 K
• B4 L and B5 K
• 11 × 17 L and 8
1
/
2
× 11K
JupiterC2EN-Print-F2_FM.book Page 95 Friday, December 17, 2004 8:17 PM