Filter
Top Products
Settings You Can Change with User Tools
81
5
Limitation
❒ Auto paper select can only be selected for the Copy function if “No Dis-
play” and “Recycled Paper” are selected. However, auto paper select is not
used if “No” is selected.
❖
❖❖
❖ Cover Sheet Tray
Allows you to specify and display the paper tray to set cover sheets. After se-
lecting the paper tray, you can also specify the display timing and copy meth-
od for two-sided copying.
Note
❒ Default setting:
• Tray to program: Off
❒ The functions that use the Cover Sheet Tray setting are front cover function
and front/back cover function.
❒ When “At Mode Selected” is selected, the cover settings options are only
displayed when the cover function or slip sheet function is selected.
❒ You can set Copying Method in Duplex setting only when “At Mode Se-
lected” is selected.
Reference
⇒ “Cover” in the Copy Reference
❖
❖❖
❖ Slip Sheet Tray, Slip Sheet Tray 1/2
Allows you to specify and display the paper tray to set slip sheets. After se-
lecting, you can also specify the display timing and copy method for two-sid-
ed copying.
Note
❒ Default setting:
• Tray to program: Off
❒ When “At Mode Selected” is selected, the cover settings options are only
displayed when the cover function or slip sheet function is selected.
❒ When “Interposer Tray” has been selected in the slip sheet 2 tray settings,
“Copying Method in Duplex” will not be displayed.
❒ OHP slip sheets cannot be copied when using the interposer.
Reference
⇒“Slip Sheets” in the Copy Reference
MartiniC1_GBzen2_FM.book Page 81 Friday, April 19, 2002 2:18 PM