Ricoh 3045 All in One Printer User Manual


 
Getting Started
14
1
A Open the bypass tray.
B Adjust the paper guides to the pa-
per size.
Open out the extender to support
paper sizes larger than A4 L, 8
1
/
2
u11 L.
Important
If the paper guides are not flush
against the paper, skewing and
misfeeds might occur.
1. Extender
2. Paper guides
C Gently insert paper face up into
the bypass tray until the beeper
sounds.
Note
The beeper will not sound if it is
turned off. Gently insert paper
until it stops.
Do not stack paper over the lim-
it mark, otherwise a skewed im-
age or misfeeds might occur.
Fan the paper to get air between
the sheets to avoid a multi-sheet
feed.
D Select the paper size.
Note
The following procedures are
not required if you select [Driver
/ Command] from [Bypass Tray
Setting Priority] in [System] of
[Printer Features] (see p.128 “Sys-
tem”). In that case, set the paper
size using the printer driver.
If you select [Machine Settings]
from [Bypass Tray Setting Priority]
in [System] of [Printer Features]
(see p.128 “System”), the set-
tings made using the control
panel have priority over the
printer driver settings.
If the printer driver is not used,
select [Machine Settings] from
[Bypass Tray Setting Priority] in
[System] of [Printer Features] (see
p.128 “System”). Set paper size
using the control panel.
AJL006S
AJL007S