Specifications
114
5
❖ Duplex
• You cannot use the following copy paper with this function:
• Paper smaller than A5K, 5
1
/
2
" × 8
1
/
2
"K (possible on A5L, 5
1
/
2
" ×
8
1
/
2
"L)
• Paper thicker than 105 g/m
2
, 28 lb.
• Paper thinner than 64 g/m
2
, 17 lb.
• Translucent paper
•OHP transparencies
• Label paper (adhesive labels)
• Postcards
• When an odd number of originals is placed in the ADF, the back of the last
page of copied paper is blank.
• During copying, the image is shifted to allow for the binding margin.
• The following paper sizes can be duplexed: A3L, B4 JISL, A4KL, B5
JISKL, A5L, 11" × 17"L, 8
1
/
2
" × 14"L, 8
1
/
2
" × 11"KL
❖ Combine
• In this mode, the machine selects the reproduction ratio automatically.
This reproduction ratio depends on copy paper sizes and the number of
originals.
• The reproduction ratios you can specify are 25–400%.
• If the calculated ratio is under the minimum ratio, it is automatically ad-
justed to within available range. However, with some ratios, parts of the
image might not be copied.
• You cannot use custom size paper.
• If the orientation of originals is different from that of the copy paper, the
machine will automatically rotate the image by 90° to make copies proper-
ly.
• If the number of originals placed is less than the number specified for com-
bining, the last page segment is left blank as shown.
AdonisC4-EN_copy_F_FM_forPaper.book Page 114 Thursday, May 12, 2005 4:04 PM