Filter
Top Products
Copying
62
2
Stamp position and original orientation
Note
❒ You cannot use the bypass tray
with this function.
❒ Only one message can be stamped
each time.
Reference
p.100 “Stamp Language”
p.100 “Stamp Position”
p.100 “Stamp Format”
A Press [Edit/Stamp].
B Press [Stamp].
C Press [Preset Stamp].
D Select the desired message.
E Press [All Pages] or [1st Page only] to
select the print page.
Note
❒ You can change the position,
size, and density of the stamp.
See p.62 “Changing the stamp
position, size and density”.
F After you specify all desired set-
tings, press [OK].
G Press [OK].
H Place your originals, and then
press the {Start} key.
Changing the stamp position, size and
density
A Press [Change].
B Select the position for print, size,
and density, and then press [OK].
User Stamp
Copies with the registered stamp.
Preparation
You have to register a user stamp
before using this function. See p.63
“To program the user stamp”.
GCSTMP5E
GCSTMP0E
AdonisC4-EN_copy_F_FM_forPaper.book Page 62 Thursday, May 12, 2005 4:04 PM