Filter
Top Products
Message Causes Solutions
Cannot copy.
Set original to ADF.
Combined copying/2-sided
copying could not be performed
because the originals were not
placed in the ARDF or ADF.
• Use the ARDF or ADF, even when
copying a single sheet.
• If you need to use the exposure glass,
turn off combined copying/2-sided
copying in [Duplex/Combine] under
copy settings, and then try again. See
p.257 "Copy Settings".
Check Paper Size
The paper size set for the
document differs from the size of
the paper in the indicated tray.
Press [FormFeed] to begin printing, or
press [JobReset] to cancel the job.
Check Paper Type
The paper type set for the
document differs from the type
of the paper in the indicated
tray.
Press [FormFeed] to begin printing, or
press [JobReset] to cancel the job.
Connection Failed
The line could not be connected
correctly.
• Confirm that the telephone line is
properly connected to the machine.
• Disconnect the telephone line from
the machine, and connect a standard
telephone in its place. Confirm that
you can make calls using the
telephone. If you cannot make calls
this way, contact your telephone
company.
Cover open A cover is open. Close the cover completely.
Dest. is not
Programmed
No Quick Dial entry is
associated with the One Touch
button you pressed.
• Press a different One Touch button.
• Assign a registered destination to the
One Touch button. See p.175
"Registering Scan Destinations".
Error and Status Messages on the Screen
401