Filter
Top Products
44
3 Maintenance
Cleaning the body
Use a cloth moistened with water then wrung well, and wipe gently to clean. Wipe the operation panel and display gently with a clean,
soft cloth.
Cleaning the platen
Use a cloth moistened with water then wrung well, and wipe gently to clean.
Cleaning the grit rollers
Use a commercially available brush to remove dust and other detritus. Brush
horizontally while rotating the grit rollers.
Any adhering grime may prevent the material from being held in place securely.
Cleaning the pinch rollers
Use a cloth moistened with water then wrung well, and wipe gently to clean.
Cleaning the reflective tape
If the tape becomes dirty, use a cloth moistened with water then wrung well, and wipe gently to clean.
Cleaning the front cover
Use a cloth moistened with water then wrung well, and wipe gently to clean.
Never lubricate the mechanisms.
Do not clean with solvents (such as benzine or thinners).
Periodically clean the platen. Attractive printing may become impossible if the platen is soiled.
Do not touch the printing heads or allow the printing heads to come in contact with anything except ink.
3-6 Cleaning
NOTICE
When performing cleaning, turn off the main power switch.
* Before turning off the main power, press the [POWER] key to switch off the sub power.