Filter
Top Products
may occur if these settings are kept different. (For more information about color stitching, refer to "The
Transparency Feature of Illustrator 9.0" later in this document.)
3. Click OK in the Setup Properties dialog.
4. In Illustrator, go to File>Document Setup. From the pop-up menu, choose Transparency.
5. The Quality/Speed slider should normally be left at the center position. If you have output problems
such as missing portions of the artwork, move the slider one tick to the left. (If you are performing
printing only, move it all the way to the left.)
6. Next, from the pop-up menu, choose Print & Export.
7. For Options, select Use Printer's Default Screen.
8. Set Rasterization Resolution to around 100 to 300 dpi. If you are going to perform enlarged printing
with Roland ColorChoice, set this to an even larger value. Larger values yield correspondingly higher
image quality, but processing time will be correspondingly longer. Set Mesh to a value that is the same
or about half of Rasterization Resolution.
9. Next, from the pop-up menu, choose Artboard.
10. Check ‘Use Print Setup’.
11. Click the Print Setup button. Print Setup dialog displays.
12. Select your printer in the Name field.
13. Click the Properties button.
14. Choose a standard paper size from the ‘Paper’ field or select a Custom page for a custom page size.
15. If you choose a custom page size, you may enter the custom size by clicking the Custom button and
entering the width and height. Click OK to Custom Defined Size dialog.
16. Click OK in the Properties dialog.
17. Click OK in the Print Setup dialog.
18. Click OK in the Document Setup dialog.
19. Go to File>Print.
20. Check Ignore Overprinting in Composite Output for normal use.
21. If not dimmed, set Output to Composite.
22. Set PostScript to Level 3.
23. Check Force Fonts to Download.
24. Click OK to print.
Adobe PageMaker® 6.5 [Windows]
These directions assume that you have Kodak ICC Color Management installed.
Before starting PageMaker, copy your printer’s PPD file to PM65\RSRC\USENGLSH\PPD4 directory. The
PPD files can be found on C:\Program Files\Roland ColorChoice 4\PPD’ folder.
1. From the Roland ColorChoice Print Monitor, click Setup>Setup Properties. Then click the Print tab.
2. Make sure the Perform Color Correction checkbox has a check in it.
3. In the ICC input profile area, select appropriate CMYK and RGB profiles. If you know which profiles your
application is using, select that profile. If you don’t, use the default settings.
4. For the ICC output profile, select the appropriate ink/media combination. Also select a rendering intent to
use.
5. Click OK to Setup Properties.
6. In PageMaker go to File>Document Setup.
36