Filter
Top Products
Vista KVM-Series Installation and Operations Manual
13
Keyboard commands (continued)
Command Key Sequence Description
Maximum
computers
<Ctrl> P x <Enter>
(x = 1 – 2 or 1 – 4)
Limits scanning to maximum
port number
Typematic
value
<Ctrl> Ax <Enter>
See Attachment F.
Factory setting = 43
Rate = 10.9 chars/sec
Delay = 500 millisec.
Mouse type <Ctrl> Q x <Enter>
Where:
x = 0 for PS/2
x = 1 for Serial
x = 2 for Wheel
x = 3 for MAC ADB
First select the CPU port, and
then enter the type command
Computer
Select
<Ctrl> x
(x = 1, 2 or 3, 4)
Connects your keyboard, video
monitor, and mouse to the
selected computer.
Connect to
next computer
<Ctrl> + (Plus) Selects the next sequential
computer.
Connect to
previous
computer
<Ctrl> - (Minus) Selects the previous sequential
computer.
Computer
disconnect.
<Ctrl> L Disconnects from computer.
Scan (On) <Ctrl> S Turns scan mode on, causing
the Vista to start scanning
sequentially from the current
port through the remaining
ports and start again at Port 1.
Scan (Off) <Ctrl> X Turns scan mode off.
Reset mouse
command
<Ctrl> O Sends reset mouse command
to the currently selected
computer. Will recover stuck
NT mouse
Table 5. Keyboard commands