Filter
Top Products
18
Vista KVM-Series Installation and Operations Manual
1. Download the flash upgrade firmware and unzip it to an .EXE file
2. Download to a computer connected to port #1.
3. Run the unzipped “EXE” file. Program will auto-detect the unit
4. Click on "File", then "Load New Firmware"
5. Locate the downloaded unzipped file (xxxx.hex) to run
6. The updated firmware file (xxxx.hex) will be installed on the unit
7. The Flash Upgrade utility can also be used to configure the KVM
switch. Click on "File", then "Configure Device". The
configuration screen will display, allowing you to configure the
"MaxPorts", keyboard and mouse type for each port and other
items shown in the below display.