Filter
Top Products
INSTALLATION
10
Vista L-Series Installation and Operations Manual
Installation
Installation of the Vista switch consists of the following steps:
It is recommended that the CPUs be powered off.
1. Connect the KVM station to the Vista switch.
(Connect the optional power adapter if the unit has the OSD option.)
2. Connect the CPUs to the Vista switch.
3. Sequentially apply power, boot the CPUs.
4. Verify keyboard, mouse and CPU operation.
Step 1 - Connecting the KVM station
Connect your KVM station’s keyboard, video monitor and mouse cables to
the corresponding Vista switches’ keyboard, video monitor and mouse
connectors as shown in Figure 5.
Figure 5. Vista to KVM station