Filter
Top Products
Vista L-Series Installation and Operations Manual
15
Keyboard commands (continued)
Command
Key Sequence
Description
Mode
command
<Ctrl> M x <Enter>
Where:
x = 1 for mode 1
x = 2 for mode 2
x = 3 for mode 3
x = 7 for mode 7
x = 8 for mode 8
x = 9 for mode 9
First select the CPU port to
configure, and then enter the
mode command.
Mode 1, 2, 3 for keyboard:
Mode 7, 8, 9 for mouse
Maximum
computers
<Ctrl> P x <Enter>
(x = 1 – 4 or 1 – 8)
Limits scanning to maximum
port number
Typematic
value
Factory setting = 43
Rate = 10.9
chars/sec
Delay = 500 millisec.
See Appendix F.
Mouse type
<Ctrl> Q x <Enter>
Where:
x = 0 for PS/2 mouse
x = 1 for Serial
mouse
x = 2 for Wheel
mouse
First select the CPU port, and
then enter the type command
Computer
Select
<Ctrl> x
(x = 1, 2, 3, 4,
5, 6, 7, 8)
Connects your keyboard,
video monitor, and mouse to
the selected computer.
Connect to
next computer
<Ctrl> + (Plus)
Selects the next sequential
computer.
Connect to
previous
computer
<Ctrl> - (Minus)
Selects the previous
sequential computer.