Filter
Top Products
20
both the access point and the station. To define shared encryption keys, choose the
Shared Key radio button and click Configure to fill in the Define Shared Keys window
(shown in Figure 3-5).
)
Note:
The
WEP
security mode is not available for 802.11n.
¾ None: No security (not recommended).
)
Note:
If the access point which the Adapter is associated has WEP set and the client has WEP
enabled, make sure that Allow Association to Mixed Cells is checked on the Security
tab to allow
association. To complete WEP encryption configuration, you must select the
802.11 Authentication Mode as appropriate on the Advanced tab of this Profile
Management dialog.
To configure the Encryption Keys under the Pre-Shared keys (Static WEP) Security mode:
Figure 3-5
)
Note:
Select different Security Options, the configurations are different; you can select the
appropriate security option and configure the exact key as your need.
3. Edit the Advanced tab
This screen below allows you to make advanced configuration for the profile.