Filter
Top Products
24
Figure 3-9
3.2.6 Scan Available Networks
1. Click Scan on the Profile Management screen (shown in Figure 3-2), the Available
Infrastructure and Ad Hoc Networks window will appear below.
2. Click Refresh to refresh the list at any time.
3. Highlight a network name and click Activate to connect to an available network. If no
configuration profile exists for that network, the Profile Management window will open
the General tab screen. Fill in the Profile name and click OK to create the
configuration profile for that network.
Figure 3-10
3.2.7 Auto Profile Selection Management
The auto selection feature allows the adapter to automatically select a profile from the list
of profiles and use it to connect to the network. To add a new profile into the Auto Selected
Profiles list, please follow these steps.
1. On the Profile Management screen (shown in Figure 3-2), click Order Profiles….
2.
The Auto Profiles Selection management window will appear (shown in Figure 3-11)
with a list of
all created profiles in the Available Profiles.