Filter
Top Products
21
2008 RuggedCom Inc. All rights reserved Rev104
Isolation Comments
1500 V
rms
Dielectric test voltage (1 minute) between coil & contacts
3.4 Twisted Pair Data Port Specifications
Data Port Media Distance Connector Type
10/100 Mbps Cat 5 UTP or STP 100m RJ45 or M12
3.5 Fiber Optical Port Specifications
For maximum flexibility RuggedCom Inc. offers a number of different transceiver choices for Gigabit fiber optical
communications. The following table details fiber optic specifications based on the order code / transceiver selected at
time of ordering.
Order
Code
Mode /
Connector
Tx λ
λλ
λ
(nm)
Cable
Type
2
Tx Pwr
(dBm)
3
(Min/Max)
Rx
Sensitivity
(dBm)
3
Rx
Saturation
(dBm)
3
Typical
Distance
1
(km)
Power
Budget
(dB)
2LCMM MM / LC 850
50µ/125
-9.5 / -4 -20 0 0.5 13
2LC10 SM / LC 1310
9µ/125
-9.5 / -3 -22 -3 10 18.5
2LC25 SM / LC 1310
9µ/125
-5 / 0 -22 -3 25 19.5
NOTES:
1. Maximum segment length is greatly dependent on factors such as fiber quality, and number of patches and
splices. Please consult RuggedCom sales associates when determining maximum segment distances.
2. All cabling is duplex type unless otherwise specified.
3. All optical power numbers are listed as dBm averages.