RuggedCom RS969 Switch User Manual


 
8
2008 RuggedCom Inc. All rights reserved Rev104
2.2 Ingress Protection IP67
IEC International Standard 60529 (Edition 2.1: 2001-02) is a "classification of degrees of protection
provided by enclosures as a system for specifying the enclosures of electrical equipment on the
basis of the degree of protection provided by the enclosure." These ratings are determined by
specific tests
The IP number is composed of two numbers, the first referring to the protection against solid
objects and the second against liquids. The higher the IP number, the better the protection. The
chart below defines levels of IP ratings.
The RuggedCom M969 Industrial Ethernet Switch is manufactured and tested to IP67 standards.
With an IP67 rating a product will be "dust tight" and remain completely sealed when immersed in
water to a depth of 1 meter for 1 hour. (IEC 60529)
These caps completely seals off unused ports on the IP67 Industrial
Ethernet Switch. It has an IP67 rated seal that keeps out all
contaminants like dirt, oil, and water.
1st
IP#
Degree of protection against access to
hazardous parts & ingress of solid objects
2nd
IP#
Degree of protection against the
ingress of water
0 No protection 0 No protection
1
Protected against solid foreign objects of 50 mm Ø
and >
1 Protected against vertically falling water drops
2
Protected against solid foreign objects of 12.5 mm Ø
and >
2
Protected against vertically falling water drops
when enclosure titled up 15°
3
Protected against solid foreign objects of 2.5 mm Ø
and >
3 Protected against spraying water
4
Protected against solid foreign objects of 1.0 mm Ø
and >
4 Protected against splashing water
5 Dust protected 5 Protected against jet-water
6 Dust tight 6 Protected against strong jet-water
7
Protected against the effects of temporary
submersion in water
8
Protected against the effects of permanent
submersion in water