Filter
Top Products
Maintenance and Troubleshooting
40 Runco VX-2i Owner’s Operating Manual
Colors in the image are
swapped; for example, reds
appear blue or vice versa.
• The Red/Pr, Green/Y or
Blue/Pb outputs from the
source are connected to
the wrong inputs on the
VX-2i.
• Ensure that the source
outputs are connected to
the correct VX-2i input.
The projector will not turn
back on after it was powered
down, or the image disap-
pears during operation.
• The projector will not turn
on for two minutes after
power-down, to protect
the lamp.
• The lamp has failed.
• Wait two minutes until the
LED at the front of the
VX-2i turns red.
Table 5-1. Troubleshooting Chart (continued)
Symptom Possible Cause(s) Solution