Filter
Top Products
Installation
Runco VX-4000d/VX-5000d Owner’s Operating Manual 21
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the VX-4000d/VX-5000d installation process. The
sections following this one provide detailed instructions.
Installation should be performed by a qualified custom video
installation specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, Refer to
page...
1
Choose a location for the projector 22
2
Install CineWide (secondary anamorphic) lens (optional) 27
3
Connect the DHD Controller to the projector 28
4
Connect signal sources to the DHD Controller 30
5
Connect external controller to RS-232 port (optional) 34
6
Connect other home theater components to 12-volt trigger
outputs (optional)
34
7
Apply power to the projector 35, 37
8
For rear-screen and/or ceiling-mount installations, select
the proper picture orientation
37
9
Lens adjustments: projected image size (zoom), position
(shift) and focus
25, 38
10
Projector calibration: adjust the following for each input,
starting with Component SD; save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position
41 through 48
Note