Filter
Top Products
OPERATION
3.4 Navigating the Menus
Most of the controls for the projector are accessed from with-
in the projector's menu system. There are several groups of
related functions, with each group selectable from the Runco
Digital Home Cinema menu as shown at right. Press at
any time to display the Runco Digital Home Cinema menu.
On the keypad, either enter the number corresponding to the
function menu you wish to access, such as for the Image
Adjustments menu, or use the keys to highlight the desired
option and press . The function menu you selected will then
appear. If you select "Load Default", this will not activate a separate function menu but rather
begin an automated process of optimizing critical display parameters such as size, position,
pixel tracking, etc.
Once you have a function menu displayed, navigate in a similar manner-enter a menu option num-
ber for any numbered option, or use to move the highlight and press at the desired
option. Extra long menus have a scroll bar on the right-use the arrow keys to see the remainder
of the menu. Items that are locked out or do not pertain to the current action appear dimmed and
cannot be selected.
NOTES: 1) If there is no signal present, all source-dependent adjustments are disabled. 2) After
15 minutes of inactivity, the projector leaves the menu system and returns to the presentation.
3) The Information menu is read-only.
When finished with a function menu, do one of the following:
Press to return to the previous screen
Press to leave the menu system and return to the active source.
On-line Help
If at any time you are uncertain what to do next, press to display detailed information about
the current menu or highlighted option. A scroll bar appears on the right-hand side of a help win-
dow if there is additional text-use the arrow keys to scroll. Press again to exit.
With no menus active, press to access general Help Topics. Scroll as necessary within a
topic. Press to return to the source. At the bottom of some menus, a line of 'hint' text also
appears.
Runco Digital Home Cinema
Scaling Parameters
Image Adjustments
Memory Banks
Installation
Lamp Adjust
Information
Load Default
Runco Digital Home
Cinema Menu
Scaling Parameters
H & V Scaling
V Scaling
Total H Dots
Fine V Dots
H - Shift
V - Shift
1000
1000
1688
15
378
264
Menu
2
Enter
Enter
Exit
Menu
Help
Help
Help
Exit
3-9