Filter
Top Products
Specifications:
Memories:
12V Output:
Power Requirements:
Operating Environment:
Dimensions (w/out feet):
Regulatory Approvals:
Limited Warranty:
VX-4c
100 Discrete memories
See Controller for Specifications
100-240V AC, 50/60 Hz, 1150W
41°–95° F, (5°–35° C), 20%–85%
Humidity (non-condensing)
Width: 28 9/10 in. (734.00 mm)
Depth: 31 3/5 in. (802.60 mm)
Height: 13.0 in. (330.20 mm)
Weight: 175 lbs. (79.4 kg) (without lens)
Complies with FCC, CE, C-Tick
Projector:
(2) Two years parts and labor
from the date of delivery to the end user.
Lamp
Warranty: 1000 hours or (6) six
months, which ever comes first.
VX-6c
100 discrete memories
See Controller for Specifications
220-240V AC, 50/60 Hz, 1700W
41°–95° F, (5°–35° C), 20%–85%
Humidity (non-condensing)
Width: 28 9/10 in. (734.00 mm)
Depth: 31 3/5 in. (802.60 mm)
Height: 13.0 in. (330.20 mm)
Weight: 181 lbs. (82.3 kg) (without lens)
Complies with FCC, CE, C-Tick
Projector:
(2) Two years parts and labor
from the date of delivery to the end user.
Lamp
Warranty: 1000 hours or (6) six
months, which ever comes first.
* ANSI Lumen Specification:
This is the typical projector luminosity (brightness) specification found in most sales literature. This measurement is
included in RUNCO literature to allow for direct comparison with other manufacturer’s projectors. These measurements
can be taken at 9,000° to 13,000° Kelvin to get expected performance data when the projector is used in professional,
commercial, and industrial displays.
CSMS Home Theater Calibration ANSI Lumen Specification:
These measurements are taken from the projector as set up in a home theater environment. The projector is calibrated
to ISF specifications including setting the color temperature to 6500° K, the standard for reproducing video.
CSMS Home Theater Calibration foot-Lambert (fL) Specification:
This is the unit of measurement used in commercial movie theaters to express image brightness. The Society of Motion
Picture and Television Engineers (SMPTE) specifies 16 fL as the target image brightness for film-based projectors using
an open gate (without film in the projector). More importantly, today SMPTE specifies 12 fL as the target image bright-
ness in Digital Cinema theaters using DLP™ technology. The foot-Lambert is dependant on screen size, screen gain,
and projector light output.
All measurements are made at RUNCO to ANSI/NAPM IT7.228-1997 specifications using the Photo Research PR-650
Spectra Colorimeter and Minolta LS-100 Luminance Meter, Video Essentials test DVD, and a Da-Lite 1.5 gain, 100-inch
wide screen. The projector is calibrated to a color temperature of 6500° Kelvin and has a minimum of 150 hours of
usage.
Specifications
5-2