Runco VX-4c Projector User Manual


 
OPERATION
Information Menu (SAMPLE)
3.8 Error Conditions
Occasionally the projector may encounter an error condition that interrupts normal operation.
Such a condition can be caused by an invalid user entry, an input signal error (most common) or
other system error.
If you would like to be notified on-screen of such errors, select the "Screen" option from the
"Display Error Messages" pull-down list (in OSD Settings menu). If you would like to be notified
via a serial communication only, select the "RS-232" option instead. To receive both notifications,
select "All". To disable error messages (except for invalid user entries), select "Off".
NOTE: Error messages also always appear at the rear LCD next to the keypad.
Invalid User
Entry
Any keypad entry not recognized by the projector will trigger an on-screen error message describ-
ing the problem. For example, if you specify a channel number that has not been defined, the mes-
sage "Invalid Channel” will appear. Or if you try to enter the wrong password, you'll see "Invalid
Password". Press or to confirm the message and eliminate the message box.
NOTE: Displaying of "Invalid User Entry" messages cannot be disabled, even if Display Error
Messages has been set to "Off".
Input Signal Err
or
Input signal errors messages appear when there are no menus present, and have selected an input
on which the projector detects a problem. While menus remain operational and pressing any key
will temporarily remove the message from the screen, you must resolve the signal problem in
order to permanently eliminate the message.
NOTE: Input signal messages appear on-screen only if Display Error Messages has been set to
"Screen" or "All".
Calibration Counter 5
Resolution Digital Cinema
Operational Parameters
Name
Serial No.
Xenon Lamp Adjust
Projector Hours
Information
Customer Name
Calibrator Name
Date of Calibration
Next Calibration
J. Chan
Andy S.
11/17/03
11/17/04
Runco VX-4c / VX-6c
123456789
20
152
Memory Bank Label
Memory Bank No. 02
Sync
Sample Rate 120Mhz
3-38
Enter
Exit