Filter
Top Products
OPERATION
USING A MEMORY BANK: You can normally
select a Memory Bank at any time by pressing
(see right). If you want to prevent a Memory
Bank from appearing in this list, you must edit the
Memory Bank as described in Memory Banks later
in this section. Such a Memory Bank can still be
selected by entering its number as shown at right.
NOTE: 1) The current Memory Bank is highlighted upon entering the Bank List, or, if this
Memory Bank is not displayed in the list, the first Memory Bank in the list is highlighted.
2) Memory Banks created automatically do not appear in the Bank List unless a parameter has
been changed.
What Memory Banks Are Defined So Far?
All available Memory Banks are listed in the Memory Banks menu, which describes how each
Memory Bank can be accessed and that serves as the gateway for editing, copying and deleting
Memory Banks.
Press to display the Runco Digital Home
Cinema menu. To display the Memory Banks
menu, press , or move the highlight to the
Memory Banks option and press . The Memory
Banks menu will appear (see sample at right),
with the active Memory Bank highlighted.
This menu lists all Memory Banks defined so far
and indicates how they are connected to the pro-
jector. The far left column contains current
Memory Bank numbers defined. The values in the far right columns indicate horizontal and ver-
tical frequencies-if a name has been defined for this Memory Bank, it appears here instead. Other
columns contain details pertaining to each Memory Bank setup, such as its switcher number, slot
location and a variety of icons indicating access to the Memory Bank. See Editing a Memory
Banks for details.
If you have more than a handful of Memory Banks, use and to see the remaining
Memory Banks not visible in this initial display.
To copy, delete or edit any of the Memory Banks listed in the Memory Banks menu, highlight the
desired Memory Bank and do one of two things:
Press if you want to copy the selected Memory Bank or delete
this or other Memory Banks. See Copying or Deleting a Memory Bank, on
the following page.
Press if you want to edit Memory Banks setups (i.e., non-image
related parameters) for the selected Memory Bank. See Editing a Memory
Bank, on the following page.
Bank : 02
bank#
bank name or
frequency
current bank #
Memory Banks
h70.72k - 17.00 -
h70.75k - 17.00 -
h63.90k + 59.94 +
01
02
03
0,1
0,1
1,5
All Banks Appear in the
Memory Banks Menu
Chan
Menu
3
Enter
Func
Enter
3-15