Filter
Top Products
C
OPYING
4.14
Setting the Time Out Option
You can set the time the machine waits before it restores the
default copy settings, if you do not start copying after changing
them on the control panel.
1
Press
Menu/Exit
on the control panel until "Copy Setup"
appears on the top line of the display.
2
Press the scroll button (
or
) to display "Timeout" on the
bottom line.
3
Press
Start/Enter
to access the menu item.
4
Press the scroll button (
or
) until the status you want
appears on the display.
You can select from 15, 30, 60 and 180 (seconds).
Selecting "Off" means that the machine does not restore
the default settings until you press
Start/Enter
to start
copying, or
Stop/Clear
to cancel.
5
Press
Start/Enter
to save the selection.
6
To return to Standby mode, press
Stop/Clear
.