Samsung Q35 Laptop User Manual


 
7-21
Chapter 7. Recovering the Computer
A4 Right-click the My computer icon, and select Manage. When the Computer
Management window appears, double-click Services and Applications on
the left, and then click Services from the sub menu tree. Select the Standard tab
in the right pane, double-click Wireless Zero Configuration and check that
Startup Type is configured to Automatic, and the Service status is Started.
A5 In the case of Windows XP, click Advanced in the [Wireless Network Connection]
dialog box (see p.4-8 'Connecting to an AP') and make sure that 'Use Windows
to configure my wireless network settings' is selected.
This may happen when a third-party wireless network setup program (e.g.
PROSet) other than Windows XP default program is installed. For setting up a
wireless network using the Windows XP program, this option should be selected.
Q6 When connecting to a computer-to-computer (Ad Hoc) network,
I cannot connect to another computer connected to the same
computer-to-computer network.
A1 Make sure that the security settings and network name of the computer-to-com-
puter (Ad Hoc) network is correct.
A2 Check the TCP/IP properties of the computers to be connected through the com-
puter-to-computer (Ad Hoc) network. All of the computers to be connected
through a computer-to-computer (Ad Hoc) network should be configured so that
their IP addresses are within the same subnet range.
󳀏 If the TCP/IP Settings are configured to DHCP, the address is automatically
configured to an address within the subnet IP range. This will take about 2~3
minutes.
󳀏 If the IP address is configured to static IP in TCP/IP properties, select Use the
following IP address in the TCP/IP properties of the wireless adapter,
configure IP address:10.0.0.1~10.0.0.254, and Subnet mask:
255.255.255.0, and then try again.
󳀏 A fixed IP is recommended for a small-size network.
Q7 When using a computer-to-computer (Ad Hoc) network,
sometimes I cannot search the access point.
A It may happen occasionally when you are using a computer-to-computer (Ad
Hoc) network connection. Even if you cannot find some access points, the
computer-to-computer (Ad Hoc) network is operating properly. Click Refresh to
view the latest search result.
Q8 Running Help file while running Profile Wizard in the wireless
LAN program (PROSet) makes the PROSet window white.
A It will be displayed properly when you finish the profile wizard. It dose not affect
the program operation.
