Filter
Top Products
A-3
Appendix
Wireless LAN Specifications (
Optional)
Intel(R) PRO/Wireless 2200BG Network
Connection
Item Specifications
Physical Dimensions 59.75 X 44.45 mm (Width X Height)
Specifications operation temperature Same as system operation specifications
and humidity Temperature: 0 ~ 70°C, Humidity: less than 85%
Power Saving Mode 135mW
Power Receiving Mode 0.85W
Specification Transmission Mode 1.45W
Power 3.3V
Compatibility IEEE 802.11g, IEEE 802.11b
Operating System Microsoft Windows XP
Network - NDIS5 Miniport Driver
Specifications Media Access Protocol CSMA/CA (Collision Avoidance) with
Acknowledgement (ACK)
Security Wired Equivalent Privacy support (WEP) 64bit/128bit
WPA*, CCX*
■
RF Specifications
R-F Frequency Band 2.4GHz
Support Channels Channels allowed per country.
Device Description Transceiver
Power 5 mW
Transmission Method 11b mode: DSSS
11g mode: OFDM
Data Rate (Mbps)* 11b mode: 11, 5.5, 2, and 1
11g mode** : 54, 48, 36, 24, 18, 12, 9, and 6
Antenna Type Internal Antenna 2 EA (main/aux)
* The data rate may differ from the actual data rate.
** 11g mode is supported only when the device is connected with an IEEE802.11g device (e.g.
IEEE802.11g compatible Access Point).
* This piece of equipment supports the Wi-Fi wireless LAN security standard,
WPA (Wi-Fi Protected Access) and CCX (Cisco Compatible eXtensions). To connect to a
wireless network consisting of the WPA and CCX, 1.2.2.8 or higher version of wireless LAN
driver have to be installed on your computer, and certificates or PROSet may be required
depending on the network settings. For driver update, visit www.samsung.com and for
information on the PROSet installation, refer to P.4-13 ”Wireless Network Setup Using the
Wireless LAN Setup Program” . For more information, ask your network administrator.