Filter
Top Products
5
Align the connector on the card
with the connector on the printer
control board. Push the card firmly
into the connector until it is
completely in place.
Result:
The two connectors should fit
snugly together.
PRINTER OPTIONS
F.10
3
Remove the two screws from the
metal plate covering the opening
for cable connector.
Remove the plate.
4
Unpack the option card.
6
Gently tighten the screws to secure the card to the system board.
7
Continue with ‘Closing the Printer Cover’ on page F.3.
8
Install the network printer driver(called SyncThru) provided on
the CD-ROM. See Network Management Software User’s Guide for
installation.
Network Option Card