Filter
Top Products
English 25
Appendix
Troubleshooting
Before calling for service, check the information in this section to see if you can remedy any
problems yourself.
If you do need assistance, please call the phone number on the warranty card, the phone
number on the back cover of this manual, or contact your dealer.
Table 2. Troubleshooting problems
Symptom Corrective Actions
There is no screen image
• Check to see that both the monitor and the
computer are plugged in and turned on.
“No Connection,
Check Signal Cable” appears
• Check the signal cable connections between the
computer and the monitor.
“Sync. Out of Range” appears
• Check the maximum resolution and the
frequency on the video port of your computer.
• Compare these values with the data in the
Display Modes Timing chart, on page 28.
The image is too light or too dark
• Adjust the Brightness or Contrast settings.
The image is too large or too small
• Adjust the Size settings.
The colors are distorted with dark or
shadowed areas
• Activate the Degauss feature.
The power indicator is amber blinking or
amber blinking
• The monitor is using its power management
system. Check the power management utility on
your computer
You need the monitor driver software
• You can download the driver from the internet at
http: //www.samsung-monitor.com
http: //www.samsungmonitor.com (USA only)
12NF(E)body.fm Page 25 Tuesday, October 17, 2000 5:25 PM