Samsung 1200NF Computer Monitor User Manual


 
English 6
Setting up Your Monitor
Windows
®
95
To determine the version of Windows
®
95 that your computer uses, right click on the
My
Computer
icon on the Windows desktop and select
Properties
. The version number can be
seen on the
General
section under “System”. Follow the directions given below according to
the version of your Windows
®
95 operating system:
Version 4.00.950A
1
Click on
START
,
SETTINGS
,
CONTROL PANEL
,
DISPLAY SETTINGS
tab,
CHANGE DISPLAY TYPE
,
CHANGE
,
HAVE DISK
.
2
Type the diskette drive letter in the box and click
OK
.
Version 4.00.950B
1
Click on
START
,
SETTINGS
,
CONTROL PANEL
,
DISPLAY
,
ADVANCED
PROPERTIES
,
MONITOR
tab,
HAVE DISK
.
2
Type the diskette letter in the box and click
OK
.
Self-Test Feature Check (STFC)
Your monitor provides a self test feature that allows you to check whether your monitor is
functioning properly. If your monitor and computer are properly connected but the monitor
screen remains dark and the power indicator is blinking, run the monitor self-test by
performing the following steps:
1
Turn off both your computer and the monitor.
2
Unplug the video cable from the back of the computer.
3
Turn on the monitor.
If the monitor is functioning properly, you will see a white box with a red border and black
text inside as shown in the following illustration:
12NF(E)body.fm Page 6 Friday, October 20, 2000 8:53 AM