Filter
Top Products
OSD mode allows for easy access to any of the of the monitor settings. The tabs across the top of
the control panel list the general description of the controls within that tab. Selecting the the tab
displays a list of menu items. Any tab and submenu item can be randomly accessed for quick tuning
of the monitor.
z
Button Definition
Undo
- Restores the monitor value for the active control pane to its previous setting. If no change
was made to the current control pane, undo will have no affect.
Reset
- Restores the monitor value for the active control pane to its factory setting.
Slider
- Increases or decreases the monitor value for the current control pane.
Preset
- Opens the Preset dialog box.
OK
- Applies all changes and closes Magic Tune. Magic Tune is still running in the Task Tray.
Pattern
- Select the pattern button to view the adjustment image.
z
Display Tab Definition
Wizard
- Loads the Wizard instruction pane to activate Wizard mode
Resolution
- Lists all supported resolutions of the display. Select the Preferred button to set the
display to the manufacturer's recommended settings. Selecting any resolution over than Preferred
will reduce the clarity of the display.
Brightness
- Loads the Brightness instruction pane with slider control. Select the patterns button to
load the adjustment image then use the slider to tune the brightness.
Contrast
- Loads the Contrast instruction pane with slider control. Select the patterns button to load
the adjustment image then use the slider to tune the contrast.
Image Setup
(this sub menu will not be visible if you are using the digital connection of your
graphics card and monitor) - Loads the Clock and Phase instruction pane with slider controls. Select
the patterns button to load the adjustment image then use the Clock slider to reduce any noise on
the screen. Next use the Phase slider to completely eliminate residual noise.
z
Geometry Tab Definition