Filter
Top Products
Setting Up Your Printer
2-4
Setting Up Your Printer
2-5
The SCX-1000 Series printer has two interfaces for wide connectivity;
parallel and USB. If you are running Windows 98 or higher and your
computer is equipped with a USB port, see page 2-6 for connection.
To prevent malfunction, it is strongly recommend that you use
the supplied parallel cable with the printer. If you need to
purchase another cable, ensure that it is complies to IEEE-
1284.
1
Check that both the printer and the computer are powered
off and disconnected from the power point.
2
Plug one end of the parallel cable into the connector on the
rear of the printer.
3
Push the metal clips down to fit inside the notches on the
cable plug.
4
Plug the other end of the cable into the appropriate parallel
connector on your computer and fasten it tight.
C
onnecting the Printer Cable
Chapter 2
Parallel cable connection
01-M30UK(1-6 to 2-11) 5/22/00 3:19 PM Page 4