Samsung SCX-4321 All in One Printer User Manual


 
Specifications
10.4
Supported Sizes of Paper
N
OTE
: You may experience jams when using print materials
with a length of less than 5 in. (127 mm). For optimum
performance, ensure that you are storing and handling the
paper correctly. Please refer to “Paper Storage Environment”
on page 10.5.
Paper
Dimensions
*
Weight
Capacity
**
Letter
8.5 x 11 in.
(216 x 279 mm)
16 to 24 lb
(60 to 90 g/m
2
bond) for the tray
with multi-pages
feeding
16 to 43 lb
(60 to 165 g/m
2
bond) for the tray
with single page
feeding and the
manual tray
150
sheets of
20 lb
(75 g/m
2
bond)
paper for
the tray
•1 sheet of
paper for
the tray or
manual
tray
A4
8.3 x 11.7 in.
(210 x 297 mm)
Executive
7.3 x 10.5 in.
(184 x 267 mm)
Legal
8.5 x 14 in.
(216 x 356 mm)
A5
5.8 x 8.2 in.
(148 x 210 mm)
A6
4.1 x 5.8 in.
(105 x 148 mm)
ISO B5
6.9 x 9.8 in.
(176 x 250 mm)
JIS B5
7.2 x 10.1 in.
(182 x 257 mm)
Folio
8.5 x 13 in.
(216 x 330 mm)
Minimum size
(custom)
3 x 5 in
(76 x 127 mm)
16 to 43 lb (60 to 165
g/m
2
bond) for the
tray with single page
feeding and the
manual tray
1 sheet of
paper for
the tray or
manual tray
Maximum size
(custom)
8.5 x 14 in
(216 x 356 mm)
Transparency
Same minimum
and maximum
paper sizes as
listed above.
138 to 146 g/m
2
Labels
120 to 150 g/m
2
Cards
90 to 163 g/m
2
Envelopes
75 to 90 g/m
2
(20 to 24 lb)
*. The machine supports a wide range of media sizes. See “Paper
Type, Input Sources, and Capacities” on page 3.1
**.Capacity may differ depending on media weight, thickness, and
environmental conditions.
Guidelines for Using Paper
For the best result, use conventional 20 lb (75 g/m
2
bond)
paper. Ensure that the paper is of good quality, and free of cuts,
nicks, tears, spots, loose particles, dust, wrinkles, voids, and
curled or bent edges.
If you are unsure of what type of paper you are loading, such
as bond or recycled paper, check the label on the package.
The following problems may cause print quality deviations,
jamming or even damage to the machine:
N
OTES
:
Do not use letterhead paper printed with low-temperature
inks, such as those used in some types of thermography.
Do not use raised or embossed letterhead.
The machine uses heat and pressure to fuse toner to the
paper. Insure that any colored paper or preprinted forms use
inks that are compatible with this fusing temperature (200
°C or 392 °F for 0.1 second).
Symptom Problem with Paper Solution
Poor print quality or
toner adhesion,
problems with feeding
Too moist, too rough,
too smooth or
embossed; faulty paper
lot
Try another kind of
paper, between 100 ~
400 Sheffield, 4 ~ 5 %
moisture content.
Dropout, jamming,
curl
Stored improperly
Store paper flat in its
moisture-proof
wrapping.
Increased gray
background shading/
printer wear
Too heavy Use lighter paper.
Excessive curl
problems with feeding
Too moist, wrong grain
direction or short-grain
construction
Use long-grain paper.
Jamming, damage to
machine
Cutouts or perforations
Do not use paper with
cutouts or perforations.
Problems with feeding Ragged edges Use good quality paper.