Filter
Top Products
20
3. After installing driver, shut down your computer and insert card. And power on the
computer.
4. The system recognize the Wireless LAN Card.
5.
The other procedures are same to 7~15 of
< Method 1 - Inserting card
first
>
Cf.)
The third method
:
You can combine
‘Method 1’
with
‘Method 2’
. In other words,
after inserting
card
into the computer, you can install driver and utility by
using the installshield
instead, not by the inf file. In case of Windows 2000 and Windows XP, system will
recognize the card automatically during installation .
Notice that if you install a card after removing it in a Device Manager, you have to
mark the check box(“Do you want to scan for hardware changes?”). The function is
same to the “Refresh” in ther Device Manager.
3.3 Installation Procedure of Windows ME
Please follow the following steps one by one to install the MiniPCI/PCI Card successfully.
< Method 1 - Inserting card first >
1. Insert the MiniPCI/PCI Card into the slot of your computer.
2. Power on your computer and allow
Windows ME
to load fully.
3. “
Add New Hardware Wizard
” appeared and the system looks for “PCI
Network Controller”. Check if “Search for the best driver for your
device(recommended)” is slected. Insert the MagicLAN Installation CD into the
CD-ROM drive.