Filter
Top Products
37
3.5 Installation Procedure of Windows 2000
Please follow the following steps one by one to install the MiniPCI/PCI card successfully.
< Method 1 - Inserting card first >
1. Ins
ert the MiniPCI/PCI Card into slot of your computer.
2.
Power on your computer and allow
Windows 2000
to load fully.
3.
Found New Hardware Wizard
appeared and the system looks for “Network
Controller”. Press
NEXT
button and check if “Search for the best driver for your
device(recommended)” is slected and then press
NEXT
button. Insert the
MagicLAN Installation CD into the CD-ROM drive. You can ignore the MagicLAN
Utility’s screen of the CD-ROM..
4. Mark the “CD-ROM Drive” tap and then press ‘NEXT’. You can find the INF file
and now it is ready to install our software.
5. Press
NEXT
and system will copy driver files. Now driver files are fully installed to
start the Wireless LAN Card’s operation.