Filter
Top Products
43
select the adapter and click on
Remove
. Restart your computer after uninstalling
the driver to make the changes effective.
(See the Adapter Removal in section 3.8)
7. Of the icons displayed on the right bottom of desktop, click on icon
stated
Wireless Network Connection
.
8.
When you are using DHCP, just select the AP that you want to connect in the
Connect to Wireless Network
above.
9. To manually set your IP address, WEP and some other configuration, click on
Advanced
of the above picutre
and then click
Configure
Available networks on
the
Wireless Networks
Tab . Set the SSID and parameters to be needed to modify
and then clicking on
OK.
The AP that you selected will be displayed on the
Preferred Networks.