Filter
Top Products
User’s Manual 35
On-Screen Display
Some video cards use video signals higher than 1.0V which causes the display to
be very bright.
For those video cards, use this feature to select the 1.0 V Level.
1 Push the Menu ( ) button.
2 Push the
button or button until the Advanced screen is displayed.
Push the
button or button to select Video Input Level.
3 Push the Menu ( ) button to open the Video Input Level
selection screen.
4 Use the
or buttons to select 0.7 V or 1.0 V.
Use this menu to set your monitor to the correct type of synchronization. Select
'Separate' if the computer is sending a separate synchronization signal. Select
'Sync. on Green' if the computer expects the monitor to synchronize with the
green signal it sends. Refer to your computer or video card user's manual to
determine the correct setting.
1 Push the Menu ( ) button.
2 Push the
button or button until the Advanced screen is displayed.
Push the
button or button to select Sync. Input Type.
3 Push the Menu ( ) button to open the Sync. Input Type
selection screen.
4 Use the
button or button to select Separate or Sync. on Green.
Menu
How to adjust
Video Input Level
Sync. Input Type
(Option)