Sanyo PLV-Z700 Projector User Manual


  Open as PDF
of 60
 
18
Connect the projector’s AC power cord into an AC outlet and
turn the Main On/Off switch on. The POWER indicator lights
red.
Press the POWER ON/STAND-BY button on the top control or
on the remote control.
The POWER indicator turns green and the cooling fans start to
operate. As the automatic slide shutter opens, a preparation
display appears on the screen and the countdown starts.
2
3
1
4
After the countdown, the input source that was selected the
last time appears on the screen.
Turning On the Projector
Complete peripheral connections (with a computer, VCR,
etc.) before turning on the projector.
Selected Input Source
OFF ON
Main On/Off switch
✔Note:
•Iftheautomaticslideshutterdoesnotopenproperly,theprojector
willnotbeturnedonandthePOWERindicatorwillblinkorange.
PressthePOWERON/STAND-BYbuttonagaintorestart.
•When“Countdownoff”or“Off”isselectedintheDisplayfunction,
thecountdownwillnotbedisplayedonthescreen(p.40).
•Duringthecountdownperiod,alloperationsareinvalid.
•Imagemaylookdarkforawhileafterturningontheprojector.
Lampneedssometimetostabilizeafterthepoweristurnedon.
Storedlampmodeandtheimagemodewillbeactiveafterthe
lampisstabilized.
•Whentheshutterismanuallyclosedslightlyduringprojection,the
shutterwillbeautomaticallyclosed.
Automatic Slide Shutter
Do not touch the slide shutter while it is
moving, as this could cause injury or the
projector to malfunction.
Use this tab when handling manually.
Basic Operation
Top Control
Remote Control
POWER indicator
POWER
ON/STAND-BY
button
 previous next