Sanyo POA-MD13NET2 Network Card User Manual


 
66
Chapter 7 Appendix
Examples of Connection
Peer-To-Peer connection
Connect the projector (PJ01) to the control computer (PC05) directly
Projector Name: PJ01
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
DNS : 0.0.0.0
Computer Name: PC10
IP Address : 192.168.0.10
Subnet Mask : 255.255.255.0
Default Gateway :
DNS :
Computer Name: PC05
IP Address : 192.168.0.5
Subnet Mask : 255.255.255.0
Default Gateway :
DNS :
Hub
Projector Name: PJ01
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
DNS : 0.0.0.0
Computer Name: PC05
IP Address : 192.168.0.5
Subnet Mask : 255.255.255.0
Default Gateway :
DNS :
* UTP cross cable
Connect the projector (PJ01) to the control computer (PC05) via the hub.
When the projector is connected to the computer directly without hub, the UTP cross cable
should be used .