Sanyo POA-MD13NET2 Network Card User Manual


 
35
Network Board
OWNER’S MANUAL [HD Series]
ENGLISH
The icons [A] and [B] represent the sensors located in the projector as follows:
[A]: Surrounding temperature of the projector*.
[B]: Surrounding temperature of the lamp.
* The indicated peripheral temperature of the projector is a little higher than actual surrounding
temperature.
Check the status of projector
Items Description
Lamp Mode........
Displays 2 lamps or 4 lamps mode
and lamp status as below icons with
Lamp1/Lamp2/Lamp3/ Lamp4 order.
Accumulated
Lamp-use Time
..Displays the accumulated lamp
use time in hour units (h).
Accumulated
Projector-use
Time ..................Displays the accumulated pro-
jector use time in hour unit (h).
Power Status ....Displays the status of the lamp.
Projector
Condition *
1
........Displays the status of the pro-
jector's power.
Check the status of projector
In the “Power & Status” page, you can control the projector power, and also you can
check the status of the projector as follows. To change the page, click on the page
number.
z
x
Items Description
Input Status ......Displays the selected input
mode.
Selection............Displays the source mode of
selected input mode.
Signal Status ....Displays the signal status of the
selected input mode.
Internal
temperature*
2
....Displays the temperature at
internal thermal sensors in
centigrade/ fahrenheit degrees.
*1 When occurring the internal power failure, The word “Power Failure” and its error information
code such as “FFFEFFFF” are displayed. Unplug the projector from AC outlet and ask servicing
to a qualified service personnel with this information code.
*2 The icons [A] and [B] on the page represent the thermal sensors located in the projector. If the tem-
perature at one of those sensors exceeds specified temperature, the appearance of its icon
changes to the following alert icon to let users know the abnormal temperature. Please check sur-
rounding temperature of the projector, the clogged air filters and the area surrounding the ventila-
tion fans.
White
Normal
Gray
Off
Red
Lamp replacement required
Gray with X
Abnormality of the lamp