Filter
Top Products
27
PJ Master
Owner’s Manual
Encryption setting
Setting Encryption on or off for the communication between servers.
1. Select Encryption Setting
from System menu. The setting window will appear.
2. Select either “On” or “Off” with radio button.
3. Click
OK to set the encryption.
IP Address setting
When the server provides multiple network cards and you want to change the IP address for the PJ
Master, or the PJ Master cannot acquire the IP address assigned to the server, use this command to
change or acquire the IP address manually.
1. Select IP Address Setting
from System menu. The setting window will appear.
2. Select an IP Address you want to set with the pull-down menu button. and click
OK button.
* The multiple IP addresses are listed on the pull-down menu button if the server provides multiple net-
work cards.
* If “127.0.0.1” appear on the pull-down button, the server may not connect to the network correctly.
Make sure that the network cable is connected to the server correctly and the IP address is assigned to
the server, and then restart the PJ Master.
System setting