Filter
Top Products
41
PJ Master
Owner’s Manual
Updating
PJ Master software updating
Updates the PJ Master software in the multiple servers all at once.
Before taking the procedure below, set the CD-ROM provided with a new version of PM Master
software onto your computer.
1. Select a server you intend to update the PJ Master software. If you select a top server or a server
which has child servers, the servers under the selected server are targets to update the PJ Master
software.
2. Select
PJ Master Update... from Update menu.
3. Browse and select a “Update.def” file in the “US” -“PMS” folder in the CD-ROM.
4. Click
Open and then the confirmation dialog will appear. Click Yes to execute updating the PJ
Master software.
- The updating command is sent to all the target servers to update the software at each server. On the
target server, the DOS prompt window appears on the screen to indicate the updating process. When
updating ended successfully, the prompt window closes automatically. If the PJ Master status window
is opening, it also closes automatically.
* To check that the PJ Master software was updated successfully, select Version from Help menu for the
top server, and check the version indication on “PJ-Net Ver.” column on the status list view window for
sub servers .
* If there are disconnected servers during command executing, the upper server monitors connection
status every 1 minute and keeps command until the command delivers to all the linked servers.
* For further information of the PJ Master update file, please consult your sales dealer.
Format of the command data
The format of the command data is as follows;
q Global setting command: change screen mode to “WIDE” (CF SCREEN WIDE)
w “%” Connection mark between global setting command and condition setting command.
e 1st condition setting command (CR MODELNM=PLC-XP50=0)
r “&” Connection mark between condition setting commands
t 2nd condition setting command (CR STATUS=0)
y Retry flag, 1=On, 0=Off
CF SCREEN WIDE%CR MODELNM=PLC-XP50=0&CR STATUS=0=1
q t yrew
Global Setting Command
Condition Setting Command
Updating