Filter
Top Products
Section 3: Configuration and Operation
Page 3-12 SATO D508/D512 Operator Manual
3.8 PRINTING TEST LABELS
1. The User Test Label prints the current default settings of the printer.
2. Press the FEED button while turning the power ON.
3. When the printer beeps, release the FEED button.
4. To print a large (4" wide) test label, press the LINE button. To print a small (2" wide) test label,
press the FEED button.
5. The printer will continuously print the USER TEST LABEL until the FEED button is pressed. If
the FEED button is pressed another time, printing will resume.
6. To remove the printer from the Test Label mode, power the printer OFF.
Note:
Depending on the version of your printer’s onboard software, the appearance of your test
printout may be different from that shown here.