Filter
Top Products
Section 1: Introduction
Page 1-4 SATO D508/D512 Operator Manual
1.1 GENERAL SPECIFICATIONS (CONT’D)
Attribute
MEDIA
Media Type Roll and fanfold
Label Thickness
(Label + backing paper)
0.0026” (0.6 mm*) - 0.007” (* 0.19 mm)
*Check with your dealer regarding conditions
for using thin 0.002” (06 mm) labels
Label Form Roll Label: Maximum outer diameter of 4.33” (110 mm) face out
Core Inner Diameter of 1.5” (40 mm)
Outer Diameter: 4.33” (110 mm)
Fan-fold label: Max. foldable height: 3.94” (100 mm) loaded externally)
Wind Orientation: Face-out
Label Size (adhesive labels) Width for all types:
1.1” (28 mm) - 4.65” (118 mm)
For continuous feed:
Length: 0.71” (18 mm) - 15.75” (400 mm)
For Cutter usage (optional):
Length: 1.1” (23 mm) - 15.75” (400 mm)
For Tear Off mode:
Length: 0.71” (18 mm) - 15.75” ( 400 mm)
SENSING
See-Through For die-cut label with gap: Fixed, 0.25" (6.3 mm) from left label edge
Continuous Form Sensor not used
Eye Mark Reflective sensor (for use with Pre-printed eye marks)
*All specifications subject to change without notice.