Filter
Top Products
Programming Manual 1. Introduction
SATO RISC Printers 7
1. Introduction
This manual presents the commands that are used with the SATO RISC
Printers to produce labels with logos, bar codes and alphanumeric data.
All of the RISC commands use the same syntax. Some commands refer-
ence a physical point on the label using horizontal and vertical dot refer-
ence numbers. The allowable range for these references is dependent
upon the particular printer to accomodate different print widths and reso-
lutions. These differences are noted in tables under the commands
affected.
Introduction
Command Codes
Command Codes Quick Reference
Command Codes Specifications
Interface Specification
Troubleshooting
Custom Protocol Command Codes
Custom Characters And Graphics