Filter
Top Products
Unit 4: Operation
SATO GT4xxe Series Operator Manual PN 9001138C Page 4-9
USB INTERFACE SETUP MODE
This chapter provides the programming sequences required for USB interface setup. Use the
keys of the printer’s operator panel to select and enter the required options.
Figure 4-8, USB Interface Setup Mode
INTERFACE CARD
SETTING
YES NO
INTERFACE CARD
SETTING
CARD1 CARD2
ONLINE
QTY: 000000
POWER
ENTER
OFFLINE
000000
ENTER CANCEL
CANCEL ENTER
LINE
ENTER
Press FUNCTION
anytime during
configuration.
Type password if
prompted, then press
ENTER.
Yes / NoENTER ENTER
DATA PORT
CARD1 CARD2
ENTER CANCEL
CANCEL ENTER
STATUS PORT
ENABLE DISABLE
CANCEL ENTER
IGNORE CR/LF
YES NO
ENTER CANCEL
IGNORE CAN/DLE
YES NO
CANCEL ENTER
PROTOCOL
STATUS4
STATUS5
ITEM NO CHECK
ENABLE DISABLE
BCC CHECK
ENABLE DISABLE
Select STATUS4
for USB Interface.