Filter
Top Products
19
3. Troubleshooting
Error & Status Messages on the Control
Panel
Messages/Second messages Description Solution
Add Toner
Open Front Cover and
/Follow Instructions to
Replace it
Toner is running out. It is time to supply toner.
Clear Misfeed(s)
/Follow instructions in
Front Cover
There is misfeed at the front
cover.
Remove the misfed paper fol-
lowing the instructions inside
the front cover.
Close Front/Right Cover The front or right cover is open. Close the front or right cover.
Load Bypass Tray
[Paper Size]
There is no paper left in the
Bypass Tray.
Load paper into the Bypass
Tray.
Load Paper
[Paper Size]
The paper size setting on the
tray differs from that of print-
er driver.
Load paper that matches the
paper size settings. Printing
will not automatically resume
if the paper size and orienta-
tion settings are incorrect.
Load Tray #
[Paper Size]
There is no paper left in this
tray.
Load paper into the tray indi-
cated.
Memory Overflow
Job Incomplete
A memory overflow has oc-
curred.
Add memory to the printer.
Memory Full
Job Incomplete
A memory full has occurred. Add memory to the printer.
Printing... The printer is printing. Wait for a while.
Print Overrun
Job Incomplete
A print overrun occurred on a
file being printed. Only a part
of the data on the page will be
printed, and the print job is
suspended, or the current
print job has been canceled.
To print the image correctly,
add memory to the printer or
simplify the actual data size.
Set "Page Protect" to "On" on
the printer driver. Be sure to
return "Page Protect" to "Au-
to" after the print job. With
"Page Protect" "On", the print-
er performance might be de-
creased. While using the
PostScript printer driver, low-
er the resolution setting.